Is bricklaying a dying trade?

Is bricklaying a dying trade?

How To Build a Brick Wall: A Detailed Guide

Building a brick wall might look like a simple job, yet it takes a whole lot of method and also correct technique. From making a solid foundation to attaining the ideal mortar consistency, all actions are just as essential and also add to a strong, durable brick wall.

Building a brick wall doesn’t need to be discouraging. If you’re wondering where to get going, we’ve put together a step by step overview listed below to obtain you on the best program! This overview is simply one method of building a wall: in the process you can make additional visual or practical selections as well as still wind up with a fantastic outcome.

Materials Needed

You’ll require the list below products to build your brick wall:

  • Trowel
  • Hammer
  • Bolster
  • Spirit Level
  • Shovel
  • Wheelbarrow
  • Bricks
  • String and also clamps (or nails).
  • Dry bristle brush.

Step # 1: Calculate How Many Bricks You Required.
The first step is to determine how many bricks you will certainly require for your task. Bricks are available in a range of various sizes and shapes, with the conventional UK brick gauging 215mm long x 102.5 mm deep x 65mm high. Do not fail to remember to account for mortar, which is commonly 10mm thick.

Before you do anything, you will require to determine the location you require. As a guideline of thumb, there are 60 bricks per square meter for a solitary skin wall (half brick wall) as well as 120 bricks per square meter for a one brick thick solid wall. For a more total overview, see our How Many Bricks Do I Need?

Step # 2: Order Your Bricks.
If you need to match to existing brickwork, use our brick matching solution or if it does not need to match, just ask us to discover you a brick with our cost-free brick choice service. We’ll get you the appropriate brick delivered at the ideal cost when you need it, so you can be positive in your wall prior to it’s even built! You can after that get the rest of the products from your neighborhood DIY store.

Action # 3: Prepare Your Foundation.
Among one of the most integral parts of a brick wall is the foundation. This is the support for your wall, as well as the trench size will depend on the size and also elevation of your masonry wall. For referral, you will certainly need a half a meter deep trench for a brick wall approximately one meter in elevation. Make certain you check the dimensions prior to digging as a strong trench is important to avoid your wall from falling down.

Drive wooden risks to find the ideal height for your bricks in your trench. The initial row of bricks need to rest flush in the foundation.

Step # 4: Mark Your Guideposts.
Next, mark 65mm lines (if using standard sized bricks) to determine where each row (also recognized as a training course) needs to be. Make sure these are freestanding and in the ground at either end of your masonry wall.

Set up a string line from one determining rod to the other. This will certainly be for your 2nd row of bricks, as the first string will be sitting in the trench. See to it the line is straight and level with no droop.

Step # 5: Mix Your Mortar.
Make certain you comply with maker guidelines, as the strength of your wall can depend on your mortar mix. Just mix what you need and don’t allow the mortar rest for more than an hour or two.

Saturate the bricks in water as well as let them trickle dry. This will make sure that they bond appropriately with the mortar. Although, ensure that there is no water escaping the bricks as it can make the mortar also damp.

Step # 6: Lay Your Very First Brick.
As soon as the foundation is dry, it’s time to start! Place mortar on the foundation and also make a ‘v’ shape along the mortar with your trowel. Developing a ‘v’ shaped trench spreads out the mortar out and also makes it simpler to lay the course. Area the brick in the mortar as well as press it strongly right into place, taking care to make it level.

Get the following brick and include mortar to the brief side prior to putting it down hard up against the first brick. Examine that the bricks are flush using the spirit degree. Ensure you regularly keep 10mm of mortar in between the bricks.

Action # 7: Cut a Brick in Half For The Following Row.
See to it your string line is set up for this row to know the elevation you need to accomplish. Bricks need to constantly be surprised to offer additional stamina and also support. However, a staggered wall suggests you may require to reduce a brick in half!

Grab your brick and tap securely in the center with the pointed end of your hammer. Your brick needs to break in half if you do this properly. If you’re a little unskilled, it may be best to use a boost and also a hammer – it can likewise give a cleaner cut. Location the bolster in the centre of the brick as well as faucet strongly using your hammer. A fracture must start to show up. Strike the boost hard again, and the brick must escape cleanly. It doesn’t need to be an entirely tidy cut, as the harsh sides can aid affix the brick to the mortar.

Action # 8: Repeat the Process to Build Your Brick Wall.
Currently it’s time for the second training course! Start the row by placing the cut brick down on a bed of mortar. Make sure your string line remains in the best area, and also the brick meets the string. Place the next brick, check that it is flush and continue. Repeat the process until you have actually completed the second program.

Continue working your way upwards up until you reach the desired height. Relocate the string line with each row and also continually inspect that your wall is level. Don’t fail to remember to include the 10mm for mortar!

Step # 9: Completing Your Wall.
One example could be a soldier course, where bricks are transformed up and down, with the ends facing out. As soon as you have all bricks in place, do a fast place check and also spot any spaces with mortar along the wall making use of the trowel.

Go over the brick wall utilizing a soft brush to eliminate any type of excess mortar prior to it dries out. You will likewise need to cover your wall overnight with a tarp or polythene sheet to protect it from the aspects such as rainfall or frost.

If you’re matching the brick to existing brickwork, you may need to weather the brickwork and/or tint. This will certainly already be covered in our matching procedure. You can make use of the code given from your brick acquisition to obtain 20% off this procedure as soon as your wall is ended up.

Congratulations, you have actually constructed a brick wall! Get in touch with the team at BBW Group Ltd if you require help selecting the bricks for your following project.

Related Articles

For More Information click here